Table of Contents
Advertisement
8.3
Staking Out
Diagrams
Access
STAKEOUT
XX Stakeout,
Stake page
128
The diagrams show examples for staking out with <Orientate: To North>.
Orthogonal mode
d1
P0
GPS12_52
Polar mode
P0
GPS12_53
Refer to "8.2 Configuring Stakeout" to access STAKEOUT XX Stakeout.
The pages shown are those from a typical configuration set. An additional page is
available when a user defined display mask is used.
P1
d2
d3
P0
P1
d1
d2
d3
P1
d2
P0
P1
d1
d1
d2
α
OCUPY (F1)
STOP (F1)
STORE (F1)
GPS1200+
Current position
Point to be staked
<FORW:> or <BACK:>
<RGHT:> or <LEFT:>
<FILL:> or <CUT:>
Current position
Point to be staked
<DIST:>
<CUT:> or <FILL:>
<DIRC:>
To start measuring the point being
staked. (F1) changes to STOP. The
difference between the current posi-
tion and the point being staked is still
displayed.
To end measuring the point being
staked. (F1) changes to STORE.
After ending the measurements, the
differences between the measured
point and the point to be staked are
displayed.
To store the measured point. (F1)
changes to OCUPY.
Stakeout
Advertisement
Table of Contents
