Inverse Point - Point - Leica GPS1200+ Applications Manual

2.4.1

Inverse Point - Point

COGO
Inverse Input,
Inverse page
16
The COGO calculation results are displayed on the same page.
----- is displayed for unavailable information, for example if a position only point is
used, <Δ Height:> cannot be calculated.
Description of fields
Field Option
<From:> or Choicelist
<To:>
<Azimuth:> Output
<HDist-XX:> Output
<Δ Height:> Output
<Slope Dist:> Output
<Grade:> Output
<Δ Easting:> Output
<Δ Northing:> Output
Next step
Step Description
1. PAGE (F6) changes to the Map page.
2. STORE (F1) stores the result. For <Write Logfile: Yes> in COGO
Configuration, Logfile page the result is written to the logfile.
STORE (F1)
SURVY (F5)
SHIFT CONF (F2)
SHIFT QUIT (F6)
Description
The point ID of the known points.
To type in coordinates for a known point
open the choicelist when <From:> or
<To:> is highlighted. Press NEW (F2) to
create a new point.
The direction from the first to the second known
point.
The horizontal distance between the two known
points.
The height difference between the two known
points.
The slope distance between the two known points.
The grade between the two known points.
The difference in Easting between the two known
points.
The difference in Northing between the two known
points.
GPS1200+
To store the result.
To manually occupy a point for the
COGO calculation. Available if
<From:> or <To:> is highlighted.
To configure the COGO application
program.
To not store the calculated results
and exits COGO calculation.
COGO