Chapter 1 Before Use; About Installing This Machine; Where To Install This Machine; Working Environmental Temperature - MIMAKI SIJ-320UV Operation Manual

Chapter 1 Before Use

About installing this
machine

Where to Install This Machine

Secure a suitable installation space before assembling
this machine.
The place of installation must have enough space for not
only this machine itself, but also for the printing operation.
Model Width
SIJ-320UV 5410mm
• If the place to install the machine is exposed to
strong sunlight around the window, draw a curtain
to prevent the machine from being exposed to
strong sunlight.
500 mm
or more
6500 mm or more

Working Environmental Temperature

Use this machine in an environment of 20 to 30°C to
ensure reliable printing.
The heater temperature may not reach the set value,
depending on the ambient temperature.
When this machine is used in a hot environment, the UV
lamp may reach a high temperature. Then the machines
may display a warning or error message and stop
operation including printing.
1-2
Gross
Depth Height
weight
995mm 1440mm 850 kg
1000 mm or more
500 mm
or more
1000 mm or more

About fixing machine

The leg of this machine has the level foot to fix the
machine.
Before turning the power ON, make sure that the printer
body is fixed with the leveling feet. The printer body may
start moving during operation if it is not fixed with the
leveling feet.

Moving This Machine

• When the machine is moved to any place other
than on the same step-free floor, contact your
distributor or our service office.
If you move it by yourself, failure or damage may
occur.
Be sure to request your distributor or our service
office to move this machine.