Caution In Handling Of Ink Bottles - MIMAKI SIJ-320UV Operation Manual

Chapter 1 Before Use
About IC chip
• The IC chip has information of ink color, remaining
amount of ink, expiration data, etc.
When filling the ink, insert the IC chip packed with the ink
bottle into the IC chip inserting port.
• If an IC chip that is not paired with the ink bottle is
inserted, ink can not use.
• The mark indicating color information is pasted on the IC
chip.
Ink color Indication mark
Black
Cyan
Magenta
Yellow
When [INK NEAR END] is displayed
There is a little of ink left. You can print continuously,
however, ink may end during printing. It is recommended
to add ink as soon as possible.
Press the [ENTER] key in Local to check the ink tank that
requires refilling in Local Guidance. (
When [INK END] is displayed
When it becomes Ink end (remaining amount of ink is
none), the machine cannot print. Refill ink.
About ink expiration date
You can check the expiration date of the ink in this
machine by doing the following:
(1) In Local, press the [ENTER] key several times until
[Expiration] is displayed.
The ink has its expiration date.
You can use the ink up to two months after the expiration
date, but you cannot use it after three months. Try to use
up any expired ink quickly.
The display will notify you when the ink is expired.
Ex.) When the expiration date is September 2015
October : Usable
November : Usable
December : Unusable
• When the ink is unusable, printing and/or cleaning
operation and charging with the IC chip (
10) are disabled.
In such a case, discard the ink remaining in the ink
tank of this machine, and refill new ink. (
10)
1-12
IC chip
(one black circle)
(one blue circle)
(one red circle)
(one yellow circle)
Mark indication position
P.3-21)
P.1-
P.1-

Caution in handling of ink bottles

• If you get ink in your eyes, immediately wash your
eyes with a lot of clean running water for at least
15 minutes. In doing so, also wash the eyes to
rinse ink away completely. Then, consult a doctor
as soon as possible.
• If the ink bottle is moved from a cold place to a
warm place, leave it in the room temperature for
three hours or more before using it.
• Make sure to store ink bottles in a cool and dark
place.
• Store ink bottles and waste ink tank in a place that
is out of the reach of children.
• Request an industrial waste processor for
processing of empty ink bottles.
• Be sure to thoroughly consume the ink in the ink
bottle, once it is opened, within three months. If an
extended period of time has passed away after
opening the ink bottle, printing quality would be
poor.
• Do not shake ink bottles violently. This may result
in ink leakage from the ink bottles.
• Do not touch or stain the contacts of the IC chip.
This may cause damages on printed circuit
boards.