Confirm New Password; Saving Your Work; Configuration; Logging - Patton electronics 4020 Series Getting Started Manual

SmartLink 4020 Getting Started Guide
Confirm new password
Re-enter the password for confirmation.

Saving your work

When you are finished configuring security settings, click the
Configuration

Logging

Enable Syslog

Enable or disable system logging. During normal operations, Syslog should be turned off. A sample Syslog
record of a complete call is shown below.
SYSLOG
11-09-2005 11:28:17
08:28:34 syslog: [1234] On-Hook [7190]
11-09-2005 11:28:06
08:28:23 syslog: [1234] Call-Out [7190]
11-09-2005 11:27:50
08:28:07 syslog: [1234] Call-Out [190]
11-09-2005 11:16:32
08:16:49 syslog: [1234] On-Hook [555]
11-09-2005 11:16:16
08:16:33 syslog: [1234] Call-Out [7190]
11-09-2005 11:15:38
00:00:00 syslog: DownloadConfig:No, DownloadImage:No
11-09-2005 11:15:36
00:00:00 syslog: Check Autoupgrade

Syslog Server

Specify the syslog server IP address or DNS name. This feature specifies the server for logging SmartLink 4020
system information and critical events.

Configuration

Figure 40. Configuration window
Local0.Info 209.49.110.185
Local0.Info 209.49.110.185
Local0.Info 209.49.110.185
Local0.Info 209.49.110.185
Local0.Info 209.49.110.185
Mail.Emerg 209.49.110.185
Local0.Info 209.49.110.185
button to save the changes.
Save Settings
Nov 09
Nov 09
Nov 09
Nov 09
Nov 09
Jan 01
Jan 01
7 • System
65