System Information; System Uptime; Wan Ip Address; Lan Ip Address - Patton electronics 4020 Series Getting Started Manual

SmartLink 4020 Getting Started Guide 3 • Home

System information

Figure 4. SmartLink VoIP download and configuration Home page

System Uptime

Shows how long the SmartLink 4020 has been operating since the last time it was reloaded (either by powering
the unit off and then on again, or by selecting System > Reload).

WAN IP Address

The IP address of the SmartLink 4020 on the WAN interface.

LAN IP Address

The IP address of the SmartLink 4020. If (Static) is shown next to the address, it means the IP address was
assigned to the SmartLink 4020 under the WAN Settings. (Dynamic) indicates the IP address was learned
via DHCP.

MAC address

The media access control (MAC) address of the Ethernet interface in the SmartLink.
System information 26