Step 11: Plug The Other Connectors; Step 12: Connect The Ground Wire; Step 13: Ensure All Connections Are Secure; Step 14: Reinstall The Air Box - Dynojet power commander III Installation Instructions

Stock
Connect PCIII Groundwire to Negative
i213-411 www.powercommander.com
PCIII
11. Plug the other connectors
from the PCIII in-line of
the stock TPS connectors
(Fig. J).
12. Connect the ground wire
from the PCIII to the
negative side of the battery
(Fig. K).
13. Make sure all connections
are secure and that the
wiring harness will not get
pinched or chaffed.
14. Reinstall the air box.
15. Reinstall the tail section.
16. Bolt the fuel tank down into
position.
2004 Kawasaki ZX6RR - PCIII USB - 5