Table of Contents
Advertisement
Hard drive
Description
2 TB, 5400 rpm, 9.5mm
1 TB, 5400 rpm, 9.5mm
750 GB, 5400 rpm, 9.5mm
500 GB, 5400 rpm, 7mm/9.5mm
1 TB, 5400 rpm + 8 GB NAND Hybrid HDD, 9.5mm
Hard Drive Hardware Kit (not illustrated, includes the hard drive bracket, connector cable, isolators, and
screws)
Before removing the hard drive, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the bottom cover (see
Remove the hard drive:
1.
Release the hard drive connector cable from the ZIF (zero insertion force) connector (1) on the system
board.
2.
Tilt the hard drive up at an angle (2).
Battery on page
31).
DVD±RW Double-Layer SuperMulti Drive on page
Bottom cover on page
34).
Component replacement procedures
Spare part number
801808-005
778192-005
778190-005
778186-005
731999-005
806751-001
32).
37
Advertisement
Table of Contents
