Table of Contents
Advertisement
14 Backing up, restoring, and recovering –
Ubuntu
Recovery after a system failure is as good as your most recent backup. As you add new software and data
files, you should continue to back up your system on a regular basis to maintain a reasonably current backup.
Performing a system recovery
The Deja Dup Restore Tool allows you to repair or restore the computer to its original factory state. You can
create an image restore DVD using an optional external DVD±RW optical drive. You can also create a restore
image on a USB storage device.
CAUTION:
have created and any software installed on the computer are permanently removed. The recovery tool
reinstalls the original operating system and programs and drivers that were installed at the factory.
Software, drivers, and updates not installed at the factory must be manually reinstalled. Personal files must
be restored from a backup.
NOTE:
HP recommends that you create the image restore in the event of a system failure.
Creating the restore DVDs
The restore creation software creates a set of system restore discs using blank, writable DVDs (DVD-R or DVD
+R). HP recommends using blank DVD+R discs from a manufacturer you trust, because these recovery DVDs
are so important. You need approximately 3 blank DVD+R discs. The program states how many discs are
needed at the beginning of the process.
To create restore DVDs:
1.
Click the System menu icon at the far right of the top panel, and then click System Settings > Backup.
2.
Select Storage from the panel on the left side of the window, click the down-arrow next to Backup
Location, and select the DVD from the drop-down list.
3.
Select Overview from the panel on the left side of the window, and then click Back Up Now.
4.
Follow the on-screen instructions.
Creating a restore image on a USB device
NOTE:
Be sure AC power is connected to the computer you begin.
Verify the exact amount of free space on your storage device before you begin the creation process. For most
models, you will need at least 8 GB of free space on the storage device. However, depending on the drivers
and software installed on your computer, you may need slightly more than 8 GB of space. HP recommends
that you use a 16 GB device or above for best results.
IMPORTANT:
procedure.
94
Chapter 14 Backing up, restoring, and recovering – Ubuntu
Using Restore completely erases hard drive contents and reformats the hard drive. All files you
Remember to insert your USB device into the USB port on the computer before starting this
Advertisement
Table of Contents
