Table of Contents
Advertisement
Power connector cable
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b.
Bottom cover (see
c.
Display assembly (see
d.
Speakers (see
Remove the power connector cable:
1.
Disconnect power connector cable (1).
2.
Remove the cable from the bottom cover clips (2).
3.
Lift the power connector from the bottom cover (3).
Reverse this procedure to install the power connector cable.
58
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
31), and then remove the following components:
DVD±RW Double-Layer SuperMulti Drive on page
Bottom cover on page
Removing the display on page
Speakers on page
57).
34).
55).
Spare part number
806746-001
32).
Advertisement
Table of Contents
