9.
Disconnect the WLAN antenna cable (9).
NOTE:
has already been disconnected.
NOTE:
10.
Remove three Phillips PM2.5×3.7 screws (1) that secure the system board to the keyboard/top cover.
11.
Turn the system board upside-down, from left to right (2).
12.
Disconnect the USB connector board cable from the ZIF connector (1).
46
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
If you have already removed the WLAN module (see
On select models, you may need to disconnect two WLAN antenna cables.
WLAN module on page
40), then this cable