Table of Contents
Advertisement
Heat sink (with discrete memory)
NOTE:
The heat sink spare part kit includes replacement thermal material.
Description
For use only with computer models equipped with an AMD A10 processor and a graphics subsystem with
discrete memory
IMPORTANT:
and replacement.
Before removing the heat sink, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b.
Bottom cover (see
Remove the heat sink:
1.
Loosen the four Phillips PM2×4 captive screws (1) that secure the heat sink to the system board.
CAUTION:
the screws in this order could damage the computer's processor.
48
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Make special note of each screw and screw lock size and location during removal
Battery on page
DVD±RW Double-Layer SuperMulti Drive on page
Bottom cover on page
Screws should be loosened in the order embossed on the heat sink plate. Failing to remove
31), and then remove the following components:
34).
Spare part number
809105-001
32).
Advertisement
Table of Contents
