3.
Remove cable from display enclosure (3).
Remove the display panel hinges:
1.
Remove the two Phillips PM1.9×3.5 screws (1) that secure the hinges to the display enclosure.
2.
Remove the two Phillips PM2.5×3.22 broad head screws (2) that secure the hinges to the display
enclosure.
3.
Remove the two Phillips PM2.4×4.7 screws (3) that secure the hinges to the display enclosure.
4.
Remove the hinges from display enclosure (4).
Remove the WLAN module antenna cable:
64
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts