Table of Contents
Advertisement
Display assembly (non-TouchScreen) (select models only)
Description
Display enclosure in blizzard white finish
Display enclosure in cobalt blue finish
Display enclosure in natural silver finish
Display enclosure in pretty pink finish
Display enclosure in sunset red finish
Display enclosure in "TKB" finish
Display enclosure in violet purple finish
Display bezel
Display panel cable
Display hinges
Display panel — BrightView, HD
IMPORTANT:
and replacement.
Before disassembling the display panel, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b.
Bottom cover (see
c.
Display assembly (see
Remove the display bezel:
1.
Remove the 2 screw covers (1).
2.
Remove two Phillips PM2.5×4.2 screws (2).
3.
Using a case utility tool, gently pry the bezel away from the display enclosure (3).
CAUTION:
Doing so could damage the webcam and other components.
4.
Continue to pry the bezel apart from the enclosure on the sides of the display (4).
5.
Complete the separation of the bezel from the display enclosure at the bottom of the display (5).
Make special note of each screw and screw lock size and location during removal
Battery on page
DVD±RW Double-Layer SuperMulti Drive on page
Bottom cover on page
Removing the display on page
Do not insert the case utility tool or other device at the top of the bezel near the webcam.
31), and then remove the following components:
34).
55).
Component replacement procedures
Spare part number
806737-001
806734-001
806732-001
806735-001
806733-001
810974-001
806736-001
806744-001
806745-001
806748-001
806766-001
32).
61
Advertisement
Table of Contents
