6.
Lift the bezel away from the display enclosure (6).
Remove the webcam and microphone module:
1.
Disconnect the webcam cable (1).
2.
Lift the webcam away from the display enclosure (2).
CAUTION:
removing the webcam to avoid breaking the component.
Release the display panel:
1.
Remove the four Phillips PM1.9×2.85 screws (1) that secure the display to the display enclosure.
62
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
The webcam is attached to the display enclosure with adhesive. Use gentle pressure while