Step 2
Use the wiper squeegee to clean the release
material sheet on the upper platen. Use a diagonal
motion to clean the sheet. Hold the handle at a slight
upward angle, with the wiper end facing downward.
Figure 37
Note: Do not use excessive pressure when wiping
the release material sheet. Using excessive
pressure can scratch or tear the sheet.
Step 3
Using the wiper squeegee, push the grease at the
rear of the lower grill surface into the grease can.
DO NOT use the grill scraper for this step.
Step 4
Use the grill cloth to clean the back splash plate and
the bullnose areas as needed during operation.
Note: To increase the life of the release material
sheet, wipe it with a clean, sanitizer-soaked, folded
grill cloth a minimum of four times every hour.
Models C819 & C821
CAUTION: The upper platen surface is
very HOT! To prevent burn injuries, use extreme
caution when wiping the release material sheet.
Daily Cleaning Procedures
Step 1
Raise the upper platen to the OPEN position by
pressing the red RAISE button.
CAUTION: Never use force to raise the
upper platen. Damage to components may
result. Only use the RAISE button to open the
upper platen!
23
Figure 38
Operating Procedures