Taylor C819 Operating Instructions Manual page 18

IMPORTANT! Clean the release
sheets using the grill cleaning pad and
holder identified on page 9 ONLY. Using any
other pad and holder will damage the
release sheets.
Figure 12
Note: Contact your local Taylor Distributor to
purchase the grill cleaning pad and holder.
(See page 9.)
S
DO rinse to remove cleaner and allow to dry
on a flat surface.
S
DO rotate the release material daily and
re-install on opposite side than previously
used (black side vs. brown side).
110602
Operating Procedures
Start Up of the Grill
IMPORTANT! The lower grill surface and the
upper platen MUST BE CLEAN before starting
these procedures.
Step 1
Place the power switch in the ON position.
The control will display the word "INITIALIZATION"
for five seconds and then enter the OFF mode. The
control will now display the word "OFF". The
temperature indicators will not be illuminated. A tone
will sound for 20 seconds. This tone can be stopped
immediately by touching the raise button, the
standby button, or anywhere on the display screen.
14
Figure 13
Figure 14
Models C819 & C821