Taylor C819 Operating Instructions Manual page 29

Step 6
Remove the release material clip, release sheet
retainer, and the release material sheet. Take these
parts to the sink to be washed and rinsed.
Figure 43
Step 7
Repeat steps 1 through 6 for the remaining upper
platen.
Step 8
Wash and rinse the clips and retainers in the sink.
Set them aside for future use.
Step 9
Set the release material sheets aside on a clean, flat
surface next to the sink until further cleaning is
performed. DO NOT fold, crease, or place them on
sharp objects.
Figure 44
Models C819 & C821
Step 10
Scrape the lower grill surface with the grill scraper,
from front to back.
Step 11
Use the wiper squeegee to push residual grease into
the grease cans.
Step 12
Remove, empty, and reinstall the grease cans.
25
Figure 45
Figure 46
Figure 47
Operating Procedures