Connecting To The Vm-212Dt Via Rs-232 - Kramer VM-212DT User Manual

2. Connect the HDBT source, (for example, the WP-20) to the Input 2 HDBT
connector.
3. Connect the Output 1 HDMI connector to an HDMI acceptor, (for example,
an LCD TV with speakers).
4. Connect the two Output HDBT connectors to up to two HDBT receivers, (for
example, the TP-588D or the TP-580RXR).
5. Connect the Audio Out 3.5mm mini jack to an audio acceptor (for example,
active speakers).
6. Connect an IR emitter to the IR 3.5mm mini jack.
7. Connect the serial RS-232 Data 3-pin terminal block to a device to be
controlled, (for example, the LCD TV connected in step 3).
8. Connect a PC via RS-232 to the RS-232 Control 3-pin terminal block, (see
Section
9. Connect the VM-212DT to the mains electricity using the mains cord
provided.
6.1

Connecting to the VM-212DT via RS-232

You can connect to the VM-212DT via an RS-232 connection using, for example, a
PC.
To connect to the VM-212DT via RS-232:

Connect the 3-pin terminal block serial port on the VM-212DT to the RS-232
9-pin D-sub port on your PC, (pin Tx to pin 2, pin Rx to pin 3, and G to pin 5)
10
6.1).
VM-212DT - Connecting the VM-212DT