Table of Contents
Advertisement
5.4
Connecting to the VM-114H via RS-232
You can connect to the VM-114H via an RS-232 connection using, for example, a
PC. Note that a null-modem adapter/connection is not required.
To connect to the VM-114H via RS-232:
• Connect the RS-232 9-pin D-sub rear panel port on the product unit via a
9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin 5
need to be connected) to the RS-232 9-pin D-sub port on your PC
6
Wiring the Twisted Pair RJ-45 Connectors
When using STP cable, connect/solder the cable shield to the RJ-45 connector
shield.
Figure 3
connectors.
i
EIA /TIA 568B
PIN
1
2
3
4
5
6
7
8
Pair 1
Pair 2
Pair 3
Pair 4
10
Wiring the Twisted Pair RJ-45 Connectors
defines the TP pinout using a straight pin-to-pin cable with RJ-45
Note, that the cable Ground shielding must be connected/soldered to
the connector shield.
Figure 3: TP Pinout Wiring
Wire Color
Orange / White
Orange
Green / White
Blue
Blue / White
Green
Brown / White
Brown
4 and 5
1 and 2
3 and 6
7 and 8
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Advertisement
Table of Contents
