Connecting the VM-2C Technical Specifications Figures Figure 1: VM-2C 1:2 Component Video DA Figure 2: VM-2C 1:2 Component Video DA (Top Side Panel) Figure 3: VM-2C 1:2 Component Video DA (Lower Side Panel) Figure 4: Connecting a VM-2C Unit Tables...
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors 2 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com Introduction...
(often associated with low quality cables) Avoid interference from neighboring electrical appliances that may adversely influence signal quality and position your Kramer VM-2C away from moisture, excessive sunlight and dust Your VM-2C...
Figure 3 illustrates the lower side panel: Figure 3: VM-2C 1:2 Component Video DA (Lower Side Panel) Table 1: VM-2C 1:2 Component Video DA Features Feature 12V DC RCA Connector RCA Connector Y RCA Connector RCA Connector RCA Connector Y RCA Connector...
(not illustrated in Figure 4). 1 Switch OFF the power on each device before connecting it to your VM-2C. After connecting your VM-2C, switch on its power and then switch on the power on each device...
WEIGHT: 0.3kg. (0.66lbs.) ACCESSORIES: Power supply, mounting bracket 1 Specifications are subject to change without notice Technical Specifications of the VM-2C , or Y, U, V , or Y, U, V ) on RCA connectors, 1Vpp/75 ) on RCA connectors, 1Vpp/75...
Page 8
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 9
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the TOOLS VM-2C and is the answer not in the manual?
Questions and answers