Connecting The Rs-232 Port; Connecting The Ethernet Port; Figure 2: Connecting The 910 Digital Audio Preamplifier - Kramer 910 User Manual

Figure 2: Connecting the 910 Digital Audio Preamplifier

6.1

Connecting the RS-232 Port

You can connect to the unit via a straight pin-to-pin RS-232 connection,
using for example, a PC.
Connect the RS-232 9-pin D-sub port on the unit via a straight cable (pin 2
to pin 2, Pin 3 to pin 3, and pin 5 to pin 5) to the RS-232 9-pin D-sub port
on the PC. Is a shielded cable is used, connect the shield to pin 5.
Note: There is no need to connect any other pins.
6.2

Connecting the ETHERNET Port

You can use the Ethernet port to control the 910.
• To connect directly to a PC using a crossover cable, see
Section 6.2.1
10
Connecting the 910 Digital Audio Preamplifier
KRAMER: SIMPLE CREATIVE TECHNOLOGY