Connecting To The 905Xl Via Rs-232 - Kramer 905xl User Manual

3. Connect the Output terminal block to a pair of speakers.
Connect the "L+" and the "L-" terminal block connectors to the left speaker,
and the "R+" and the "R-" terminal block connectors to the right speaker.
Do not ground the loudspeakers.
4. Connect the power cord to the power socket and connect the cord to the
mains electricity (not shown in
5. If required, connect a PC and/or controller to the RS 232 port, (see
Section 6.1
6.1

Connecting to the 905xl via RS-232

You can connect to the 905xl via an RS-232 connection using, for example, a PC.
Note that a null-modem adapter/connection is not required.
To connect to the 905xl via RS-232:
• Connect the RS-232 9-pin D-sub rear panel port on the 905xl unit via a
9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin 5
need to be connected) to the RS-232 9-pin D-sub port on your PC
8
).
Figure 2).
905xl - Connecting the 905xl Power Amplifier