Connecting a Balanced/Unbalanced Stereo Audio
Source to the Balanced Input
The following are the pinouts for connecting a balanced or unbalanced stereo audio source to
the balanced input:
Figure 4: Connecting a balanced stereo audio
source to the balanced input
Connecting to PA-240Net via RS-232
You can connect to the
From the RS-232 9-pin D-sub serial port connect:
•
Pin 2 to the TX pin on the
•
Pin 3 to the RX pin on the
•
Pin 5 to the G pin on the
RJ-45 Pinout
PA-120Net, PA-240Net – Connecting the PA-240Net
PA-240Net
via an RS-232 connection
PA-240Net
RS-232 terminal block.
PA-240Net
RS-232 terminal block.
PA-240Net
RS-232 terminal block.
PIN EIA /TIA 568B
PIN
Wire Color
1
Orange / White
2
Orange
3
Green / White
4
Blue
5
Blue / White
6
Green
7
Brown / White
8
Brown
Figure 5: Connecting an unbalanced stereo audio
source to the balanced input
using, for example, a PC.
Kramer Electronics Ltd.
8