Related Manuals for Kramer VM-2C
Summary of Contents for Kramer VM-2C
-
Page 1: User Manual
K R A ME R E LE CT R O N IC S L TD . USER MANUAL MODEL: VM-2C 1:2 Component Video DA P/N: 2900-000112 Rev 2... -
Page 3: Table Of Contents
Achieving the Best Performance Safety Instructions Recycling Kramer Products Overview Defining the VM-2C 1:2 Component Video DA Connecting the VM-2C Technical Specifications Figures Figure 1: VM-2C 1:2 Component Video DA Figure 2: Connecting the VM-2C 1:2 Component Video DA VM-2C – Contents... -
Page 4: Introduction
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11: Sierra Products. Congratulations on purchasing your Kramer VM-2C 1:2 Component Video DA, which is ideal for the following typical applications: ... -
Page 5: Getting Started
Avoid interference from neighboring electrical appliances that may adversely influence signal quality Position your Kramer VM-2C away from moisture, excessive sunlight and dust This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building. -
Page 6: Safety Instructions
To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. VM-2C - Getting Started... -
Page 7: Overview
Overview The Kramer TOOLS VM−2C is a high−performance distribution amplifier for component video (Y, Pb/Cb, Pr/Cr) signals. It takes one input, provides correct buffering and isolation and distributes the signal to two identical outputs on RCA connectors. In particular, the VM-2C features: ... -
Page 8: Connecting The Vm-2C
Connecting the VM-2C Always switch off the power to each device before connecting it to your VM-2C. After connecting your VM-2C, connect its power and then switch on the power to each device. To connect the VM-2C as illustrated in the example in Figure 1. -
Page 9: Technical Specifications
-40° to +70°C (-40° to 158°F) HUMIDITY: 10% to 90%, RHL non-condensing DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7" x 0.98" x 2.95"), W, D, H WEIGHT: 0.3kg. (0.66lbs.) ACCESSORIES: Power supply, mounting bracket RK-3T 19” rack adapter OPTIONS: VM-2C - Technical Specifications... - Page 11 For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. SAFETY WARNING Disconnect the unit from the power supply before opening and servicing P/N:...
Need help?
Do you have a question about the VM-2C and is the answer not in the manual?
Questions and answers