Three knobs lower and raise the build plate
· Tightening the knobs[turning them counterclockwise] moves the build plate away from the
extruder nozzles.
· Loosening the knobs[turning them closkwise] moves the build plate away from the extruder
nozzles.
· The distance between the extruder nozzles and the build plate should be about the thickness of
the leveling card.
Note: To view a video of the build plate leveling process, please go to the FF Creator pro video
page
on:
https://www.youtube.com/playlist?list=PLWfXP01hqgWsEfzZ5Z-sZzifa05iIZb0Q
Then, users should
1. Insert your SD card with target x3g file to your Creator Pro. .
2. Turn on the Creator Pro.
3. Select [Print from SD] on the LCD panel.
4. Select the file you want to print and press [OK].
5. And the printer will heat up the nozzle and the build plate automatically and start to print after the
nozzle and the build plate reaches the aimed temperature.,
40