Flashforge Creator Pro User Manual page 24

5.1.9 Supports
After loading the model, click [Edit]--[Supports] or click the Supports icon directly, then you
will enter the support edit mode(as shown in the picture below). Click [Back] to exit when you
finish editing
5-5
①Support Options
Click the Support Options, an option box will appear, supports options include "treelike"and
"linear", when choose "treelike", click [OK], then the support generated will be treelike structure;
when choose "linear", click [OK], then the support generated will be linear structure.
Threelike Supports: You can set up treelike specifications such as overhang thresh, post diameter,
base diameter and base height.
Linear Supports: You can set up linear specifications such as overhang thresh and pillar size.
If the model already had support, when you choose one of the supports options,software will judge
whether existing supports need to be deleted or not depend on the type of existing support, and will
pop up the corresponding prompt to let you make the choice.
24