Flashforge Creator Pro User Manual page 32

5.1.13 Tool
5.1.13.1 Update Firmware
Before updating firmware, you need to find and depress "driver-creator-pro" in the SD card.
Click and install the relevant installation program.
Launch the Flashprint(Now you computer and Creator pro are connecting with each other), click [Tools] and
[Update Firmware], then click [OK] and a dialog box will pop up. Click [Yes] to start firmware update.
5.1.14 Help Menus
① Help Contents：Click
② Check for Updates：Click
③ About FlashPrint：Click
up. The contents include the current software version and copyright information.
[Help]--[Help Contents], you can read the help contents.
[Help]--[Check for Update]
[Help]--[About Flashprint], the software information box will pop
to detect the available updates online.
32