Flashforge Creator Pro User Manual page 21

[View]
Click the icon
Method 1. Hold down the right mouse button and drag.
Method 2. Hold down the
● Scale
Rotate the mouse wheel to enlarge or shrink the build plate.
②Set View
Allows users to view the object on the build plate. Six views are under the view menu, that is, home
view, bottom view, top view, front view, back view, left view and right view.
Method 1: Click the the
Method 2: Click the the
with six views for selecting.
③Reset View
Allow users to reset views by the following two methods:
Method 1: Click the
Method 2: Click the
you can click [Reset].
④Show Model Outline
[View]--[Show Model
Click
⑤Show Steep Overhang
[View]--[Show Steep
Click
and horizontal line is within the overhang threshold value, the surface has steep overhang and it
becomes red in the software. Overhang threshold value could be set as needed. The default value is
45 degree.
and then you can rotate the object by the following two methods:
Shift key, hold down the left mouse button and drag.
[View] button, there are six views in the drop- down list
[Look] icon
[View] menu and select
[View] button on the left, click it again and you will see the viewing options,
Outline], it will highlight the yellow border of the object
Overhang]. When the intersection angle between the model surface
on the left, click it again and a submenu will appear
[Home View]
21