OFF
Once
Continuous
11.4.2 Automatic Tap Balance
Using Tap "1"(left) as the reference, adjust automatically Tap"2"(right) for black
level and gain level.
This is effective only when the gain auto balance is set at Continuous.
11.4.3 Manual Tap Balance
Using Tap "1"(left) as the reference, adjust manually Tap "2"(right) for black level
and gain level.
This is effective only when the gain auto balance is set at OFF.
11.4.4 Once Tap Balance
Using Tap "1"(left) as the reference, adjust Tap "2"(right) for black level and gain
level once.
This is effective only when the gain auto balance is set at Once.
11.5. Exposure auto (Auto Shutter)
The exposure can be automatically controlled .
This function works only in the exposure mode, "Timed".
In the JAI AGC Reference, the brightness level can be controlled.
In Exposure Auto, there are three modes.
OFF
Once
Continuous : The exposure control is always active.
The detailed settings are:
ExposureAuto speed
ExpsoureAuto Max
ExposureAuto Min
Gain Auto reference
ALC Channel area
exposure control
11.6. Balance Ratio (Only for AB-200GE)
This is the function to set the white balance.
This adjusts both red channel and blue channel to get proper white balance.
The adjusting range is -7dB (0.446 times) to +10dB (3.162 times).
AM-200GE / AB-200GE
: Use for the manual setting
: Use for adjusting once
: Use for adjusting continuously
: Exposure auto is disabled
: The exposure control is done only when it is enabled.
:Set the reaction speed of exposure control
:Set the maximum level of the exposure control
:Set the minimum level of the exposure control
:Set the target level of video.
For instance, set 100% of the video as the reference
video level
:Set the portion of the image to be used for
- 74 -