Timer Control; Timerselector; Timerduration; Timerdelay - IAI AM-200GE User Manual

9.5. Timer Control

9.5.1 TimerSelector

There is one internal timer. The timer function starts if the start trigger, TimerDelay
and TimerDuration are set.

9.5.2 TimerDuration

This is used to set the maximum value of the timer.
The internal timer counter can be set in 16bit.

9.5.3 TimerDelay

This can set the period to start the timer. This results in the delay of the timer start.
The internal delay counter can be set in 16bit.

9.5.4 TimerValue

This can set the default value of the timer and read the current setting value.

9.5.5 TimerStatus

This checks the current status of the timer and provides one of the following.
TimerIdle：
TimerTriggerWait：
TimerActive：
TimerCompleted：
16bit DelayTimer
16bit Timer
TimerStatus

9.5.6 TimerTriggerSource

The start trigger signal to the timer can be selected from the following list.
① Off
② AcquisitionTrigger
③ AcquisitionStart
④ AcquisitionEnd
⑤ FrameTrigger
⑥ FrameStart
⑦ FrameEnd
AM-200GE / AB-200GE
When the timer is not operating.
When TimerTriggerSource is OFF.
When the timer is waiting for the start trigger
When the timer is operating
When the timer reaches its maximum value
DelayTimer = TimerDelay
Delay Delay
Timer Timer
"0000" Up
Timer Timer
TimerValue Up
TimerTrigger
Timer
TimerIdle TriggerWai TimerActive
t
Fig.41 Timer Status
- 54 -
Timer = TimerDuration
DelayTimer NoChange
TimerNoChange
TimerIdle
Timer
Completed