Video Data Rate (Network Bandwidth); Exposure Function - IAI AM-200GE User Manual

8.3.2 Video data rate (network bandwidth)

In the GigE Vision Interface, it is important to know the packet data volume in order
to configure the system. the following table shows the reference value for each
output at Normal Mode (AcquisitionMode Continuous, FrameTrigger OFF).
Model Pixel Type
AM-200GE MONO8
MONO10_PACKED
MONO12_PACKED
MONO10
MONO12
AB-200GE BAYGR8
BAYGR10_PACKED
BAYGR12_PACKED
BAYGR10
BAYGR12
RGB8_PACKED
YUV422Packed
*1) The above data is if OB transfer mode is ON.
*2) If Jumbo Frames are not used, the frame rate except MONO8 and BAYGR8 will be
reduced by maximum 2%. Depending on Pixel Type, if Jumbo frames are used, the
packet size may be automatically optimized to a smaller size.

8.3.2.1 Exposure function

During sensor readout, the next exposure will start
e
Exposur
AM-200GE / AB-200GE
Frame Rate
40.6Frame/s
38.4Frame/s
28.8Frame/s
40.6Frame/s
38.4Frame/s
28.8Frame/s
14.5Frame/s
28.8Frame/s
1,2,3 ------------- 1199,1200
SensorReadOut Tap1,2
1,2,3 -------------------1199,1200
Transfer
Fig. 32 Exposure behaviour
Packet size (Packet size is
1500)
663Mbps
939Mbps
939Mbps
662Mbps
939Mbps
939Mbps
709Mbps
939Mbps
Next
e
Exposur
th
Line
Next
SensorReadOut Tap1,2
th
Line
- 35 -