Initial Content Check; Assembling The Plinths; Storing The Ups - Riello 100 kVA Manual

I
NITIAL CONTENT CHECK
After opening the packaging, it is first necessary to check the contents. Identify the accessories box and UPS plinths.
Check the content of the accessories box:

instruction manual

safety manual

inspection certificate

warranty card

CD ROM software

RS-232 serial cable

keys for door

burnished knurled screws for plinths
Check for the presence of 3 plinths:

2 side plinths. Length: 80.6 cm.

1 front plinth - Length: 70.6 cm.
A
SSEMBLING THE
Take hold of the two 80.6 cm side plinths and 4 burnished knurled screws.
Secure the two side plinths to the right and left of the UPS. To do so, use two M4x8 burnished knurled screws for each
side plinth.
Take hold of the front plinth and two burnished knurled screws.
Secure the front plinth to the bottom of the front of the UPS (immediately below the door). To secure it, use two M4x8
burnished knurled screws.
S UPS
TORING THE
The place of storage must respect the following characteristics:
Temperature:
Level of relative humidity:
P
LINTHS
0°- 40°C (32°-104°F)
95% max