Preliminary Work; Heater Unit Installation Location - Webasto thermo top e Installation Instructions Manual

Preliminary Work

WARNING!
- Disconnect the battery "earth" or "ground" connection.
- Depressurize the cooling system.
- Copy the factory number from the original type label to the duplicate type label.
- Remove years that do not apply from the duplicate label.
- Attach the duplicate label (type label) in the appropriate place.
- Copy the vehicle data from the type label on the right-hand spring strut dome to the EC homolo-
gation for the heater unit.
- Remove the air filter together with the intake hose.
- Remove the coolant reservoir cap.
- Remove the A/C control panel.
- Remove the lower instrument panel trim on the driver's side.
- Remove the lower left-hand A-pillar trim and fold back the floor trim above the pedals.
- Remove the left-hand front and rear door sill cover.
- Remove the rear seat cushion.
- Remove the lower luggage compartment cover and take out the Styrofoam molded parts.
- Open the fuel tank cap, ventilate the tank.
- Close the tank cap again.
- Open the right-hand fuel sender service lid
Please remove page 29 of the "Operating instructions for the end customer" and add it to the vehicle
operating instructions.
1
SUBARU Impreza 1.5R; 2.0R

Heater unit installation location

1 Heater unit
1
Installa-
tion loca-
tion
5