Scanning Just One Page And Confirming The Scanned Image - Canon DR-5020 Instructions Manual

Chapter 2 Scanning a Document
Scanning just one page and confirming the
scanned image
Before you start scanning a document comprising a number of sheets, you can
scan just one page and confirm the scanned image. In this scan mode, the
scanned image is not automatically saved. If you want to save it, save it manually.
(See "Saving the Scanned Image" P.28)
1
Load one page on the document tray.
If you have placed two or more pages on the document tray, the document tray will
stay at the up position after the first page of the document is scanned.
MEMO
Remove the other pages on the document tray, and lower the document tray to the
down position.
2
Select [File] - [Scan page].
The document is scanned.
3
Check the scanned image. (P.27)
4
Save the scanned image if necessary. (P.29)
26