Canon DR-5020 Instructions Manual page 64

Chapter 2 Scanning a Document
Page Size
Brightness
Contrast
• The contrast setting is disabled when [Mode] is set to [Black and White].
• On DR-5020, the [Contrast] checkbox is gray when [Mode] is set to [Black and
MEMO
White].
<Buttons>
Item
OK
Cancel
Detail
62
Allows you to select the paper size of the document to be
scanned. Available choices are as follows:
LETTER - 8.5 x 11 in.
LEGAL - 8.5 x 14 in.
A3 - 297 x 420 mm
A4 - 210 x 297 mm
A4-R - 297 x 210 mm
A5 - 148 x 210 mm
A6 - 105 x 148 mm
B4 (ISO) - 250 x 353 mm
B4 (JIS) - 257 x 364 mm
B5 (ISO) - 176 x 250 mm
B5 (JIS) - 182 x 257 mm
Scanner's maximum (295 x 432 mm)
If a document larger than the specified size is scanned, the
surrounding edges of the document will be clipped. Alternately,
if a document smaller than the specified size is scanned, a black
margin will be formed on the surrounding edges of the
document.
If you have selected Detect Page Size (P.63) in the Detail
Settings dialog box, this setting is ignored.
Automatically or manually sets the brightness of the image.
When you manually set the brightness, you can set within the
range 1 to 255.
Automatically or manually sets the contrast. When you manually
set the contrast, you can set within the range 1 to 13. A larger
value increases the contrast, while a smaller value decreases
the contrast.
Description
After you are finished making settings, click [OK] to enable them
and close the dialog box.
Cancels any settings you have changed and closes the dialog
box.
Opens the Detail Settings dialog box (P.63) so you can set
special features like filter, scan speed, page size detection, and
Control Sheet detection.