Summary of Contents for Canon imageFORMULA DR-2050C
Page 1
Please read this manual before using this unit. After you finish reading this manual, keep it in a safe place for future reference. To customers who have purchased a Canon DR-2050SP Document Scanner: If you plan to use the document scanner in the Presentation mode, you should read this manual together with the DR-2050SP User’s...
Page 3
Canon U.S.A. Inc. One Canon Plaza, Lake Success NY 11042, U.S.A. Tel. No. (516)328-5000 RADIO INTERFERENCE REGULATIONS (For 120 V models) This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the...
Page 4
AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED REPRESENTATIVE OF CANON. Should you have any questions concerning this Agreement, or if you desire to contact Canon for any reason, please write to Canon’s local affiliate.
Page 5
The standards and logos are uniform among participating nations. Trademarks • Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. • Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries.
The Canon DR-2050C/DR-2050SP is a compact document scanner with automatic paper feed. In addition to the conventional functions of a document scanner, the Canon DR-2050SP is equipped with a Presentation mode that enables the user to directly connect the scanner to a liquid crystal projector without using a computer, and project scanned images onto a screen.
Symbols Used in This Manual The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings.
Contents INTRODUCTION ... 1 Manuals for the Scanner ... 1 Symbols Used in This Manual ... 2 Chapter 1 Before Using the Scanner ... 5 1. Important Safety Instructions ... 6 Installation Location ... 6 Power ... 7 Moving the Scanner ... 7 Remote Control (DR-2050SP only) ...
Page 10
2. Removing and Attaching the Rollers ... 62 Roller Replacement Cycle ... 62 Resetting the Counter ... 63 Removing and Attaching the Feed Roller ... 65 Removing and Attaching the Retard Roller ... 68 3. Troubleshooting ... 72 The Scanner Does Not Turn ON ... 72 The Scanner Is Not Recognized ...
1. Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below. Installation Location The performance of this scanner is affected by the environment in which it is installed. Make sure that the location where the scanner is installed meets the following environmental requirements.
Model: MG1-3607 • If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information. Moving the Scanner • When moving the scanner, always hold it with both hands to avoid dropping it.
Remote Control (DR-2050SP only) • Do not leave the remote control on the floor, as damage may result if it is stepped on. • Do not disassemble the remote control. • Take care not to misplace the remote control. • Do not drop or cause physical shock to the remote control. •...
Page 15
OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or the service representative for further information. • Do not drop the scanner, or subject it to impact or strong shock.
• Turn OFF the power switch for safety when not using the scanner for a long period of time, such as overnight. Also, turn OFF the power switch, and disconnect the AC adapter from the scanner and disconnect the power cord from the power outlet for safety when the machine will not be used for an extended period of time, such as during consecutive holidays.
2. Features The main features of the DR-2050C/DR-2050SP document scanner are described below. Compact Configuration The scanner has a very compact configuration, measuring only 11.7" (298 mm) (W) × 7.7" (197 mm) (H) × 3.9" (100 mm) (D). The small footprint of this standup vertical scanner saves space.
Skip Blank Page Function The scanner is equipped with a Skip Blank Page function that allows it to scan a document regardless of whether every document is double-sided or single-sided. Prescan Function The scanner is equipped with a Prescan function that allows you to adjust the contrast and brightness of a prescanned image and then send the adjusted image to the application software, without needing to scan the document again.
3. Names and Functions of Parts This section describes the name and function of each part. Make sure to read this section and familiarize yourself with the parts of the scanner before using the scanner. For part names and their functions of the DR-2050SP, see the DR- 2050SP User’s Guide Presentation Mode Edition.
Page 20
Back/Left Side Ventilation Openings Power Switch Turns the scanner ON and OFF. (OFF) (ON) CAUTION Make sure that ventilation openings are not blocked. Blocked openings can cause internal heat build up, creating the risk of fire. Conventions Before Using the Scanner USB Connector Connect the included USB cable or one that supports...
• Use the most recent version of the USB 2.0 driver provided by Microsoft. Contact your local authorized Canon dealer or service representative for more detailed information. • Not all USB interfaces provided as standard with personal computers are guaranteed.
Page 22
• Scanning speeds are lower if your computer’s standard USB interface is USB Full-Speed (equal to USB 1.1). • Use the USB cable provided with the scanner, or a Hi-Speed USB 2.0 compatible cable. • If the CPU, memory, interface card, and other specifications do not satisfy the installation requirements, the scanning speed may be greatly reduced and transmission may take a long time.
5. About the Setup Disc The Canon DR-2050 series scanner setup disc contains the software listed below: • DR-2050C Driver Scanner driver for use with the DR-2050C/DR-2050SP scanner, and the Job Registration Tool. • CapturePerfect 3.0 ISIS-compatible application developed for Canon document scanners.
Chapter 2 Using the Scanner 1. Documents ... 20 2. Preparing the Trays ... 21 Setting Up the Document Feed Tray ... 21 Using the Document Guide Adapter ... 22 Using the Feed Extension Plate ... 22 3. Placing a Documents ... 23 How to Feed with the Page Separation Mode ...
1. Documents This scanner can scan documents ranging in size from business cards and checks to LTR/A4 size documents. The size of documents that can be scanned is shown below. For Page Separation mode (continuous feed) (See “How to Feed with the Page Separation Mode,”...
2. Preparing the Trays Prepare the document feed tray in accordance with the document size and type. Setting Up the Document Feed Tray Pull the document feed tray towards you to open it. In the case of a short document, open the upper cover. Using the Scanner...
Using the Document Guide Adapter When a document becomes skewed during scanning or when scanning a document that is folded in half (See p. 27.), install the document guide adapter on the document guide to keep the document from becoming skewed. Install the document guide adapter by positioning it as shown in the illustration.
3. Placing a Documents There are two methods for paper separation, called the Page Separation mode and Bypass mode for feeding documents. Feeding documents continuously from a stack of documents placed in the feed tray is called the Page Separation mode.
Page 30
Adjust the document guide to the width of the document being scanned. IMPORTANT Do not hold the tips of the document guide adaptor when installing it. Doing so can damage the document tray. Fan the stack of documents to be scanned, and then angle the stack as shown in the illustration so the top edge of the first page is the lowest.
Page 31
Set the document in the scanner with the back of the document facing forward and its top edge facing downwards. IMPORTANT The document sheet capacity is 50 sheets of non-curled sheets. Note, however, that the capacity is less when document pages are not being fed correctly. Adjust the document guides so they match the width of the document.
How to Feed with the Bypass Mode Raise the feed selection lever (Bypass mode). Bypass mode Page Separation Adjust the document guide to the width of the document being scanned. Start scanning from the application. Set the document in the scanner with the back of the document facing forward and its top edge facing downwards.
Scanning Folio (Folded Document) The scanner uses a folio scanning method to scan documents that are bigger than LTR/A4 size (maximum A3 size). To do folio scanning, fold the document in half and place it on the scanner. Both sides of the folded document are scanned and combined into a single image.
For details on how to install each application and the driver, see the Easy Start Guide. Using CapturePerfect 3.0 CapturePerfect 3.0 is an ISIS-compatible application developed for Canon document scanners. CapturePerfect 3.0 includes the following modes. Select the desired scan mode from the scan menu to perform scanning.
Page 35
Note The following two jobs are already registered as scan jobs. • Color Document Document is scanned in 24 bit color, as Simplex 300 dpi and then saved in [My Pictures] in the My Documents folder. • Binary Document Document is scanned in black and white, as Simplex 200 dpi and then saved in [My Pictures] in the My Documents folder.
Page 36
CapturePerfect 3.0 starts up. Follow the procedure below to select the Canon DR-2050C document scanner as the scanner to be used. 1. On the [Scan] menu, click [Select Scanner]. Using the Scanner...
Page 37
2. Select [CANON DR-2050C] click the [OK] button. Note If [CANON DR-2050C] is not displayed in the list of scanners, re-install the ISIS/TWAIN driver. (See “Step 3. Installing the Software” in the Easy Start Guide.) 3. Set the “Default Page Size”.
Page 38
Set the scan settings. For details setting the scanning settings, see “ISIS Driver Settings,” on p. 50, and ISIS/TWAIN Driver Help. Place your document. (See “Placing a Documents,” on p. 23.) On the [Scan] menu, select [Scan Batch to File]. Using the Scanner...
Page 39
The [Scan Batch to File Setting] dialog box opens. For more details on how to scan documents, see the CapturePerfect Operation Guide and CapturePerfect Help. Specify the file name and the file type for saving the image data, and click [Save] to start scanning.
Using the Job Function The job function allows you to scan merely by pressing the [Scan] button on the scanner according to the Windows event function and job tools. Scanned image data is automatically processed by the function registered to the [Job] button by the Job Registration Tool.
Page 41
Function,” on p. 37.) Click the [Start] button, and then click [Programs] ([All Programs] if you are using Windows XP) [Canon DR-2050C] The Job Registration Tool starts up. Note • Job Registration Tool is a TWAIN compatible application that is installed with the ISIS/TWAIN driver.
Page 42
Set up the Job Registration Tool. For details on setting up the Job Registration Tool, refer to “Job Registration Tool Settings” (See p. 54.) and the Job Registration Tool Help. Note • You can register jobs for numbers 1 through 10. •...
“Monitor for DR2050C” is displayed and the scan is executed. When there are no more document sheets, the image data is transferred according to the specified conditions. [Sending complete] is displayed on the “Monitor for DR2050C.” Click [Close] to close the “Monitor for DR2050C.” Setting the Event Function By setting [Events], you select the application to be started up when [Launcher] is selected in Job Registration Tool.
Page 44
2. For Windows XP, switch the Control Panel to Classic View, or select [Printers and Other Hardware] in the working field. Control Panel (category view) Control Panel (classic view) 3. Click [Scanners and Cameras]. Using the Scanner Printers and Other Hardware...
Page 45
4. Select [CANON DR-2050C USB], and then click [Properties]. 5. Click the [Events] tab. Using the Scanner...
Page 46
At [Send to this application] unmark the applications that are not to be started up, and click [Apply]. Click [OK] to close [CANON DR-2050C USB Properties]. Restart Windows to enable the new settings for the event function. Using the Scanner...
Page 47
Note • When two or more applications are marked at [Send to this application], the application selection dialog box will be displayed when [Launcher] in the [Job Tools] dialog box is selected, and the [Scan] button is clicked. • Certain applications may not run normally when started as an event. •...
5. Clearing a Paper Jam When paper jams occur during scanning, use the following procedure to clear them. CAUTION When removing jammed paper, take care not to cut your hands on the edges of the paper. Remove any documents from the document feed tray. Pressing the OPEN knob from both sides (a), pull the front unit forward to open it (b).
Page 49
IMPORTANT If you are removing the document manually, make sure to remove the document carefully, by pulling on it steadily and without applying too much force. Should the paper tear, make sure to remove any torn pieces remaining in the scanner. Gently press the left and right sides of the top of the Front Unit.
6. Scanning Hints This section describes helpful hints for setting up and using your scanner. Refer to these hints when you set up the ISIS/TWAIN driver. For more details on items not described in this section, see “Software Settings,” on p. 49. Scanning Double-sided Documents •...
Scanning Multiple Documents • I want to divide a document that cannot be placed all at once into multiple stacks and scan them as a single file Set the “Feeding Option” in the Scanner Settings to [Automatic Feeding]. When the scanner detects a document, scanning starts automatically, and you can continue scanning batches until your job is complete.
Page 52
Scanning Documents Containing Blank Sheets • I want to skip blank sheets contained in a document stack. Set “Scanning Side” to [Skip blank page]. [Double-sided scanning] is not performed, and blank pages are skipped. See “ISIS Driver Settings g,” on p. 50, and “TWAIN Driver Settings g,” on p.
Page 53
Adjusting Scanned Image • I want to enhance text on a document with a dark background Set “Mode” to [Text Enhancement]. The background of the document is removed to enhance the text. See “ISIS Driver Settings b,” on p. 50, and “TWAIN Driver Settings b,” on p.
Page 54
Prescan Function • I want to preview the image before I scan it For the ISIS driver, check the [Prescan] checkbox. The Prescan window is displayed when scanning starts. See “ISIS Driver Settings k,” on p. 50. For the TWAIN driver, check the [Prescan] checkbox and click [Preview]. One sheet of the document is scanned, and the Prescan window is displayed.
7. Software Settings This section describes the setting items when setting the ISIS driver, TWAIN driver, and Job Registration Tool. For a more detailed description, read the Help files for each item. ISIS Driver Settings...P. 50 TWAIN Driver Settings...P. 52 Job Registration Tool Settings...P.
ISIS Driver Settings Basic Setup Dialog Box Batch Separation * Batch Separation is not available when the [Standard Feeding] Feeding Option is selected. Feeding Option * The Delay setting is available when the [Automatic Feeding] Feeding Option is selected. Scan Area Dialog Box * Area setting is not available when the [Auto-detection] Page Size is selected.
Basic Setup Dialog Box a User Preference Name and save your settings. Names can consist of up to 32 characters. b Mode Selects the scanning mode. [Text Enhanced] and [Advanced Text Enhancement II] process the background of a document so the text is enhanced and easier to read.
TWAIN Driver Settings Basic Setup Dialog Box Scanning Option If an application program executes scanning directly from the basic setup dialog box, the [Scan] button is displayed instead of the [OK] button, and the [Area window] is displayed in the Scan Area dialog box. Scan Area Dialog Box * Area setting is not available when the [Auto-detection] Page Size is selected.
Basic Setup Dialog Box a User Preference Name and save your settings. b Mode Selects the scanning mode. [Text Enhanced] and [Advanced Text Enhancement II] process the background of a document so the text is enhanced and easier to read. The Smoothing Gray/Color options used to smooth images and reduce moiré...
Job Registration Tool Settings Job Registration Tool Dialog Box Copy Dialog Box New/Editing Dialog Box Dialog box contents will differ depending on the selected function. Save as file File type The [Setting] button is enabled when [PDF] or [TIFF] is selected. Print Attach to E-mail Using the Scanner...
Job Registration Tool Dialog Box a Job list Shows the registered jobs. The job for the icon ( ) that is colored is executed when the scan button is pressed. b [New/Editing] button Opens the New/Editing dialog box. c [Copy] button Copies a registered job to another Job No.
Chapter 3 Appendices 1. Regular Maintenance ... 58 Cleaning the Scanner ... 58 Cleaning Inside the Scanner ... 58 Cleaning the Scanning Glass and the Rollers ... 59 Cleaning the Metal Rollers ... 61 2. Removing and Attaching the Rollers 62 Roller Replacement Cycle ...
1. Regular Maintenance Perform the regular maintenance described below to maintain peak scanning quality. CAUTION • When cleaning the scanner or the inside of the scanner, turn OFF the power switch and unplug the power cord from the outlet. • Do not use spray cleaners to clean the scanner. Precision mechanisms inside the scanner may get wet and result in malfunction.
IMPORTANT Scratches on the scanning glass may cause marks on the images and could cause feeding errors. If there are scratches on the scanning glass, contact your local authorized Canon dealer or service representative. Appendices...
Page 66
Rotate the rollers (a) and (b) as you clean them. Moisten a cloth with plain water, wring out excess water, wipe the rollers and then dry it with a clean dry cloth. Remove the feed roller and retard roller. (See p. 66, p. 69.) IMPORTANT After removing the feed roller and retard roller, clean them and then return them to the scanner.
Cleaning the Metal Rollers Turn on the scanner. Open the document feed tray. Pressing the OPEN knob from both sides (a), pull the front unit forward to open it (b). Use a clean dry cloth to wipe the metal rollers ( Press the Scan button and Stop button at the same time to rotate the metal rollers in small increments.
• Be sure to reset the counter after replacing the rollers. (See “Resetting the Counter,” on p. 63.) • Contact your local authorized Canon dealer or service representative for information about the exchange roller kit (feed roller and retard roller).
Resetting the Counter After replacing the feed rollers, open the [Counter setup] dialog box and reset the counter. Follow the procedure below to open the [Counter setup] dialog box. 1. Click the [Start] button, [Control Panel]. (For Windows XP, click the [Start] button Panel].) 2.
Page 70
3. Select [CANON DR-2050C USB], and then click [Properties]. 4. Click the [Counter] tab. Appendices...
Click the [Reset] button, and then make sure that the [Retard and Feed roller] has been set to 0. Removing and Attaching the Feed Roller Follow the procedure below to remove and attach the feed roller for cleaning or replacement. Note When attaching the feed roller during installation, operate the roller fastening lever according to the removal procedure and then attach the feed roller.
Removing the Feed Roller Pressing the OPEN knob from both sides (a), pull the front unit forward to open it (b). Open the roller cover on the scanner side. Insert a finger into the depression in the cover and open it. Raise the roller lock lever (a), and then slide it to the left (b).
Page 73
Shift the feed roller to the left to separate it from the shaft, and then remove it. Attaching the Feed Roller Set the feed roller into the hollow inside the roller cover, and align the notch in the roller with the scanner shaft. Slide the roller lock lever to the right, and then insert the shaft into the hole on the left side of the roller.
Lower the lever to lock the roller shaft. Close the roller cover. Return the cover fully to its original position until you hear it click into place. Gently press the left and right sides of the top of the Front Unit. Return the unit fully to its original position until you hear it click into place.
CAUTION Do not use excessive force when removing or attaching the rollers. Doing so may damage them. Removing the Retard Roller Pressing the OPEN knob from both sides (a), pull the front unit forward to open it (b). Holding the edges of the roller cover on the inside of the front unit, open the cover.
Page 76
Shift the Retard Roller to the left to separate it from the shaft, and then remove Attaching the Retard Roller Position the retard roller so the notch in the roller is facing the scanner’s shaft. Slide the roller lock lever to the right, and then insert the shaft into the hole on the left side of the retard roller.
Page 77
Push the roller lock lever towards the back of the scanner to lock the retard roller in place. Attach the roller cover. Be sure that the upper unit is completely closed by pushing on both edges with both hands until you hear a click. Gently press the left and right sides of the top of the front unit.
Scanning Results Are Not as Expected...P. 75 If, after consulting this section, you still cannot resolve the problem, contact your local authorized Canon dealer or your service representative. The Scanner Does Not Turn ON Check the following if the scanner does not turn on: •...
The scanner does not support your USB interface. Solution This product is not guaranteed to operate with all types of USB interfaces. Contact your local authorized Canon dealer or service representative for more information. (See p. 15.) Problem The scanner does not support the USB cable.
The rollers inside the scanner are dirty or worn. Solution Refer to p. 59 and clean the rollers. If the rollers are worn, then they need to be replaced. Contact your local authorized Canon dealer or service representative to purchase a roller replacement kit.
Paper Is Not Ejected Correctly When you are performing page-by-page scanning while a multi-page document is set in the scanner, scanning pauses with the trailing edge of the scanned sheet being engaged by the eject roller. Problem Under these conditions, the scanner enters a standby state and pauses for the next sheet.
Page 82
Clean the scanning glass and rollers. If lines still appear on the image even after cleaning the scanning glass and rollers, the scanning glass inside the scanner may be scratched. Contact your local authorized Canon dealer or service representative. (See p. 59.) Appendices...
Page 83
Windows [Start] button, and then click [Programs] (All Programs in the case of Windows XP) [Canon Document Scanner], and then [DR-2050C & 2080C Adjustment Tool], or use the [Scanner Adjustment] function of the ISIS/ TWAIN driver. Follow the instructions on the dialog box that appears on the screen to adjust the scanner.
4. Uninstalling Software If the ISIS/TWAIN driver, “Job Registration Tool,” and “CapturePerfect 3.0” are not operating normally, follow the procedure below to uninstall them. Then, re-install the software from the DR-2050 series setup disc. (See “Step 3. Installing the Software,” in the Easy Start Guide.) IMPORTANT Be sure to log on as an administrator when using Windows 2000 Professional or Windows XP.
Page 85
The [Add/Remove Programs Properties] dialog box appears. Note For Windows XP, the [Add or Remove Programs] dialog box appears. From the list in the dialog box, select the application you want to delete click [Change/Remove]. For more information on uninstalling each application, see the following: See “Uninstalling the ISIS/TWAIN Driver/Job Registration Tool,”...
Uninstalling the ISIS/TWAIN Driver/Job Registration Tool From the Programs list in the dialog box, select [Canon DR-2050C/2080C Scanner Driver] (or [DR-2050C Job Tool]) button. The [Confirm File Deletion] screen appears. Click the [Yes] button. The [Remove Shared File ?] dialog box appears.
Page 87
Click the [Yes] button to start the uninstallation. Note All deleted shared files can be reinstalled by installing the software again. After uninstall is complete, click the [OK] button to exit the uninstaller. Appendices...
Uninstalling CapturePerfect 3.0 Select [CapturePerfect 3.0] from the list in the dialog box [Remove] button. The file delete confirmation screen appears. Click the [Yes] button. Uninstallation starts. Appendices click the...
Page 89
After uninstallation is complete, click the [Finish] button to exit the uninstaller. Appendices...
Kit to replace the feed rollers (feed roller and retard roller). • For details on replacing the rollers, see “Removing and Attaching the Retard Roller,” on p. 68. • Contact your local authorized Canon dealer for detailed information about replacement parts. Specifications are subject to change without notice.
Page 97
CANON ELECTRONICS INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS CANON LATIN AMERICA, INC.
Page 98
Keep this Quick Guide near the scanner for ready reference. Basic Setup Dialog Box Batch Separation * Batch Separation is not available when the [Standard Feeding] Feeding Option is selected. Feeding Option * The Delay setting is available when the [Automatic Feeding] Feeding Option is selected.
Page 99
Keep this Quick Guide near the scanner for ready reference. Basic Setup Dialog Box 1 1 1 1 1 User Preference Name and save your settings. Names can consist of up to 32 characters. 2 2 2 2 2 Mode Selects the scanning mode.
Page 100
Keep this Quick Guide near the scanner for ready reference. Basic Setup Dialog Box Scanning Option If an application program executes scanning directly from the basic setup dialog box, the [Scan] button is displayed instead of the [OK] button, and the [Area window] is displayed in the Scan Area dialog box.
Page 101
Keep this Quick Guide near the scanner for ready reference. Basic Setup Dialog Box 1 1 1 1 1 User Preference Name and save your settings. 2 2 2 2 2 Mode Selects the scanning mode. [Text Enhanced] and [Advanced Text Enhancement 2] process the background of a document so the text is enhanced and easier to read.
Page 102
Keep this Quick Guide near the scanner for ready reference. Job Registration Tool Dialog Box Copy Dialog Box New/Editing Dialog Box Dialog box contents will differ depending on the selected function. Save as file File type * The [Setting] button is enabled when [PDF] or [TIFF] is selected.
Page 103
Keep this Quick Guide near the scanner for ready reference. Job Registration Tool Dialog Box 1 1 1 1 1 Job list Shows the registered jobs. The job for the icon ( ) that is colored is executed when the scan button is pressed. 2 2 2 2 2 [New/Editing] button Opens the New/Editing dialog box.