When Scanning A Document One Page At A Time; (Bypass Mode); Placing Cards - Canon imageFORMULA DR-S150 User Manual

When scanning a document one page
at a time (Bypass mode)
When scanning a thick document one page at a time or scanning a
document that has multiple pages fastened together, set the feed
selection lever to Bypass mode. This enables the placed document to
be scanned without the pages being separated, regardless of the
number of pages.
1
Set the feed selection lever to Bypass mode.
2
Place the document as described in the
multiple documents" procedure
IMPORTANT
• When scanning multiple page documents that are fastened
together, such as invoices, place the documents so that the
edge that is fastened together is facing down.
"Scanning
on p. 25.
• If double-feeding occurs, turn on [Disable double-feed
detection] on the scanner's touch panel.
Or, clear the [Detect by Ultrasonic] check box in the [Error
Detection] tab on the scanner driver settings screen.
p. 62) Or, select the [Rapid recovery system] check box on the
[Others] tab on the scanner driver settings screen.

Placing Cards

When scanning cards, set the feed selection lever to Bypass mode
and then place one card at a time horizontally.
1
Set the feed selection lever to Bypass mode
2
Adjust the document guides to fit the width of the card to
be scanned.
27
(See p. 41)
(See
(See p. 34)