System Requirements - Canon DR-5020 Instructions Manual

Chapter 1 Installation and Basic Operation of Scanning Utility 5000
You must have the following hardware and OS for Scanning Utility 5000 to work
correctly.
An IBM PC/AT or compatible computer with a Pentium 133 MHz CPU or higher
and at least 64 MB of memory
• OS: Microsoft Windows
Windows 2000 Professional
• At least 100 MB of hard disk space (at least 5 MB after installation)
An SVGA compatible display
A Microsoft Windows compatible keyboard, mouse and printer, CD-ROM drive
(4x speed or faster)
A SCSI card whose operation has been confirmed
Operation of the following SCSI cards has been confirmed:
Adaptec AHA-1540 series and AHA-2940 series
SCSI-2 compatible SCSI cable
• Scanning Utility 5000 uses a dedicated scanner driver. Scanner drivers such as the
ISIS driver and TWAIN driver are not required.
MEMO
• When you install Scanning Utility 5000, another folder "\ceiscan" is created under the
Windows folder in addition to the installation destination folder, and the file "cei*.dll" is
copied to \Windows\system.
Note that Scanning Utility 5000 no longer operates correctly if these files are modified.
• The names of the \Windows and \Windows\system folders vary according to the
version of Windows you are running. In the following explanations, substitute the
names of the \Windows and \Windows\system folders with the names of the folders in
the version of Windows you are using.
6

System Requirements

® 95/98/Me or Microsoft Windows NT ® 4.0 Workstation/