Canon DR-5020 Instructions Manual page 79

EAN bar code settings
Set the details of EAN bar codes.
[Input] - [Addon enable]
Click here to read addon codes.
Codabar bar code settings
Set the details of Codabar bar codes.
[Input] - [Checksum]
Click here to read checksum codes.
[Input] - [7DR]
Click here when the checksum calculated by Codabar reads a 7DR bar code.
[Input] - [Modulas16]
Click here when the checksum calculated by Codabar reads a Modulus16 bar
code.
[Output] - [ST/SP]
Click here to enable output of start/stop codes.
[Output] - [Checksum]
When [Input] - [Checksum] is checked, you can set whether or not to output the
checksum code.
2.4 Setting Scan Conditions
2
77