Treadmill Assembly - Matrix T3xe Owner's Manual

DANGER
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a
qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify
the plug provided with the product. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
WARNING
Connect this exercise product to a properly grounded outlet only.
Never operate product with a damaged cord or plug even if it is working properly. Never operate any product if it
appears damaged, or has been immersed in water. Contact Customer Tech Support for replacement or repair.
WARNING:
Failure to follow these specifications can cause damage to your product and
can void the warranty.
All video and power outlets must be functional the day of delivery / assembly of the product. The client is responsible
for any additional installation charges associated with return visits.
Electrical supply may fluctuate in your area. To ensure stable performance of the product, use the proper gauge wire.
8
MX15_T1x_T1xe_T3x_T3xe_OM_Rev2_0.indd 8-9

TREADMILL ASSEMBLY

WARNING
There are several areas during the assembly process that special attention must be paid. It is very important to follow the
assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed
correctly, the treadmill could have parts that are not tightened and will seem loose and may cause irritating noises. To
prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.
Before proceeding, find your treadmill's serial number located on a barcode sticker near the on/off power switch and
power cord and enter it in the space provided below. The console serial number is located on a barcode sticker on the
back of the console near the bottom center.
ENTER YOUR SERIAL NUMBERS AND MODEL NAME IN THE BOXES BELOW:
CONSOLE SERIAL NUMBER:
FRAME SERIAL NUMBER:
MATRIX
MODEL NAME:
» Use the information above for initial setup and when calling for service.
CONSOLE SERIAL #
PLACEMENT
SERIAL NUMBER LOCATION
9
5/22/15 1:49 PM