Cleaning; Deck And Belt Replacement - Matrix T3xe Owner's Manual

RECOMMENDED CLEANING TIPS
Preventative maintenance and daily cleaning will prolong the
life and look of your equipment.
A Use a soft, clean cotton cloth. DO NOT use paper towels to
clean surfaces on the treadmill. Paper towels are abrasive
and can damage surfaces.
B Use a mild soap and damp cloth. DO NOT use ammonia
based cleaner or alcohol. This will cause discoloring of the
aluminum and plastics it comes into contact with.
C Do not pour water or cleaning solutions on any surface.
This could cause electrocution.
D Wipe the console, heart rate grip, handles and side rails
after each use.
E Brush away any wax deposits from the deck and belt area.
This is a common occurrence until the wax is worked into
the belt material.
F Be sure to remove any obstructions from the path of the
elevation wheels including power cords.
G For cleaning 1xe, 3xh and 3xe displays, use distilled water
in an atomizer spray bottle. Spray distilled water onto soft,
clean, dry cloth and wipe display until clean and dry. For
very dirty displays, adding vinegar is recommended.
CAUTION: Be sure to have proper assistance to install
and move the unit in order to avoid injury or damage to the
treadmill.
36
MX15_T1x_T1xe_T3x_T3xe_OM_Rev2_0.indd 36-37

DECK AND BELT REPLACEMENT

One of the most common wear and tear items on a treadmill
is the deck and belt combination. If these two items are
not properly maintained they can cause damage to other
components. This product has been provided with the most
advanced maintenance free lubricating system on the market.
WARNING: Do not run the treadmill while cleaning the belt
and deck. This can cause serious injury and can damage the
machine.
Maintain the belt and deck by wiping the sides of the belt and
deck with a clean cloth. The user can also wipe under the belt
2 inches (~51mm) on both sides removing any dust or debris.
The deck must be flipped and reinstalled or replaced by an
authorized service technician. Please contact Matrix Fitness
Systems for more information.
WARNING
To remove power from the treadmill, the power cord must
be disconnected from the wall outlet.
CHECK FOR DAMAGED PARTS
DO NOT use any equipment that is damaged or has worn or
broken parts. Use only replacement parts supplied by Matrix
Fitness Systems.
MAINTAIN LABELS AND NAMEPLATES Do not remove
labels for any reason. They contain important information. If
unreadable or missing, contact Matrix Fitness Systems for a
replacement or an authorized service provider.
MAINTAIN ALL EQUIPMENT Preventative maintenance is
the key to smooth operating equipment, as well as keeping
the user's liability to a minimum. Maintain a clean area
around the equipment, free from dust and dirt. Equipment
needs to be inspected at regular intervals. Defective
components must be replaced immediately. Improperly
working equipment must be kept out of use until it is repaired.
Ensure that any person(s) making adjustments or performing
maintenance or repair of any kind is qualified to do so.
Matrix Fitness Systems will provide service and maintenance
training at our corporate facility upon request or in the field if
proper arrangements are made (North America only).
CONSOLE RESPONSIVENESS ISSUES
(CONSOLE REBOOT):
FOR 1XE, 3XH AND 3XE CONSOLES
Press and HOLD the Channel Up and Channel Down
Button until you hear a Beep. Your console will reset.
CARE AND MAINTENANCE
HOW DO I CLEAN MY MACHINE?
Clean with soap and water cleaners only. Never use solvents
on plastic parts. Cleanliness of your treadmill and its operating
environment will keep maintenance problems and service
calls to a minimum. For this reason, Customer Tech Support
recommends that the following preventive maintenance
schedule be followed.
DAILY
• Unplug the treadmill. Clean entire machine using water
and a mild soap or other Matrix approved solution
(cleaning agents should be alcohol and ammonia free).
MONTHLY
• Unplug the treadmill and remove the motor cover. Check
for debris and clean with a dry cloth or small vacuum
nozzle.
WARNING: Do not plug the treadmill in until the motor
cover has been reinstalled.
QUARTERLY
• For T1xe, T3xh and T3xe consoles enter service mode
and select 'test'. Select 'touch calibration' and then select
'start'. Follow the on-screen prompts and touch the screen
where indicated.
37
5/22/15 1:49 PM