Matrix T3xe Owner's Manual page 12

ASSEMBLY STEP 3
YELLOW HARDWARE BAG CONTENTS :
Z19
T3
xh
SOCKET HEAD CAP SCREW
Qty: 4
Z13
Z19
22
MX15_T1x_T1xe_T3x_T3xe_OM_Rev2_0.indd 22-23
Open YELLOW HARDWARE BAG.
A
Assemble both the left and right handlebar
B
Z13
SPRING WASHER
supports to the treadmill base using 4
Qty: 4
SOCKET HEAD CAP SCREW (Z19) and 4
SPRING WASHERS (Z13).
Z13
Z19
ASSEMBLY STEP 4
WHITE HARDWARE BAG CONTENTS :
Z12 Z18
FLAT WASHER BUTTON HEAD SCREW
Qty: 10 Qty: 2
Z18
Z12
Z12
Z15
Z16
Open WHITE HARDWARE BAG.
A
Z15
BUTTON HEAD SCREW
Assemble the contact HR crossbar to the
B
Qty: 6
left and right handlebars using 2 BUTTON
Z16
BUTTON HEAD SCREW
HEAD SCREWS (Z18). Fasten the contact
Qty: 4
HR crossbar/handlebar assembly to the
console masts using 6 BUTTON HEAD
SCREWS (Z15) and 6 FLAT WASHERS
(Z12).
Z18 Assemble handlebars to the handlebar
C
supports using 4 BUTTON HEAD SCREWS
(Z16) and 4 FLAT WASHERS (Z12).
Z12
D Pull the HR wires through handlebars using
Z12 wire pull. Pull mast wire through handlebar.
Z15
Z16
ASSEMBLY TIP: look at the labels on
the HR wire coming from the contact HR
crossbar to ensure contact with HR crossbar
and left-right handlebars are assembled in
the proper orientation.
NOTE: Be careful not to pinch any wires
while assembling the right console mast.
T3
xh
23
5/22/15 1:49 PM