Add Additional Participants To A Conference Call; Merge Two Calls Into A Conference Call; End A Conference Call; Hold A Conference Call - Polycom realpresence trio 8800 User Manual

Polycom RealPresence Trio Solution User Guide

Add Additional Participants to a Conference Call

You can add up to four contacts to a conference call.
To add additional participants to a conference call:
1 During an active conference call, tap Add Participant.
2 Enter another contact's number or select a contact from Contacts or Recent Calls.
The new contact is added to the conference call after answering.

Merge Two Calls into a Conference Call

You can merge an active call and a held call to initiate a conference call.
To merge calls into a conference call:
1 In the calls screen, tap the held call.
2 Tap Merge.
The held call is merged with the active call and a conference call is initiated.

End a Conference Call

By default, when you end a conference call, your connection to the call ends, and the other participants in
the conference remain in the call. However, your system administrator can set up the system so that all
connections terminate when you end a conference call.
To end a conference call:
» During a conference call, select Hang Up

Hold a Conference Call

When you place a conference call on hold, you place all conference participants on hold. To place one
conference participant on hold, see the section
To place a conference call on hold:
» Tap Hold
.
If you're in the Calls screen, highlight the conference first.

Resume a Conference Call

Resuming a held conference call enables all participants to hear the audio of everyone on the call.
Polycom, Inc.
.
Manage Conference Call Participants.
32