Change The Backlight Timeout; Formatting Numbers; Power-Saving Mode; Change Your Office Hours - Polycom realpresence trio 8800 User Manual

Polycom RealPresence Trio Solution User Guide
7 From the Maximum Intensity screen, select Up or Down, or drag your finger along the slider, to
increase or decrease the maximum intensity the screen displays.

Change the Backlight Timeout

The backlight automatically turns on with any system activity. By setting the Backlight Timeout, you can
determine how long the system should be idle before the backlight dims to its Backlight Idle intensity. By
default, after the system is idle for 40 seconds, the backlight dims.
To change the Backlight Timeout:
1 Navigate to Settings > Basic > Backlight Timeout.
2 From the Backlight Timeout screen, select the number of seconds the system is idle before the
backlight dims. The default is 40 seconds.

Formatting Numbers

By default, the system automatically formats phone numbers based on the amount of numbers entered. For
example, 17235439078 is reformatted as +1 (713) 543-9078.
To choose the number format:
1 Navigate to Settings > Preferences > Number Formatting.
2 Select Enable or Disable.

Power-Saving Mode

By default, the system is set up with a power-saving mode that turns off the screen to conserve energy. The
system enters power-saving mode after it has been idle for a certain period of time. You can configure the
period of time that the system is idle before the screen turns off. You can configure different idle timeouts for
office hours and off hours, such as evenings and weekends.
During off hours, the message "Off Hours Mode" scrolls on the status bar. The system exits power-saving
mode if a system event occurs—for example, if the system has an incoming call or message, or you press
a key or tap the screen. If a screen saver is enabled, power-saving mode still occurs.
You can update the following power-saving settings:
● Office Hours When you start work and how long you're in the office each day (see
Office Hours).
● Timeouts The period of time the system should be idle before the screen turns off (see
Timeouts).

Change Your Office Hours

When you update your office hours, you specify when you start, and how long you work each day. The
system is idle in during the hours outside of your office hours.
Polycom, Inc.
Change Your
Change
65