First Installation Of Android; First Installation Of Dtv - Strong SRT 2400 User Manual

4.1 First installation of Android

step 1: Language
step 2: Resolution
step 3: Screen Size
step 4: Network
step 5: Date&Time:
step 6: Final step:

4.2 First Installation of Dtv

This menu allows you to install your Free-To–Air TV and radio channels from one of the three tuners.
Select a Satellite/DVB-T/Cable search, load list from USB or to load a preinstalled Germany channel list
of Astra 19.2.
step 1: Picture size:
step 2: Zap Mode:
step 3: Subtitle:
step 4: LCN:
step 5: Tuner Type:
Select Next and confirm with OK to go to step 6.
step 6: Start Scan:
10
Select your preferred language for the on screen menu. Use t u to change
language and press OK to confirm your selection.
Select the screen resolution you prefer. Default selection is Automatic, which
already shows the best setting of the connected screen. Press OK to confirm
your selection. A banner appears to confirm the new setting by selecting
OK. Confirm again with OK. If you do not see this banner immediately, wait
a couple of seconds and the screen will return to its previous state. Then try
another resolution.
Use pq to adjust the size of the screen so it exactly fits the screen you are
using. Press OK to confirm.
If you have already connected the Ethernet cable to your router, in most
cases the unit finds the correct settings automatically and jumps directly
to Step 5. If you haven't connected a Ethernet cable, but prefer using
Wi-Fi, select Wi-Fi and press OK to open the menu with the available Wi-Fi
networks. Use pq to select your network and enter the key or password.
The 0 ~ 9 buttons on the remote control can also be used for entering.
If you have successfully connected to the Internet in Step 4, this screen will
automatically show the date and your local time. If necessary, you can select
an item to modify it manually. At the bottom you will find the selection Setup
Digital TV and Finish. Select Setup Digital TV to install digital satellite channels
through the next steps in the Installation Wizard. Select Finish if you want
to install digital satellite channels at another time and directly to go to the
Android menu.
Select Scan TV channel if you would like to proceed directly to install Digital
TV from satellite, terrestrial or cable signals. Select Login in to Google to set up
a Google account. Select Homepage to skip the steps above and go directly to
the Android main page.
Select Full for the official size or Auto to adjust the size with your screen.
Choose Black Screen to get a black screen when zapping through the
channels. Select Hold Screen to hold the last watched screen when zapping
through the channels.
Select Off or the Subtitle language you would like to display.
Select On if you would like to use LCN modes in DVB-T.
Select which tuners you would like to use: Satellite and Terrestrial or Satellite
and Cable.
Press OK to enter this menu which shows the option Satellite Installation to
search satellite channels of your choice by using a satellite dish antenna. The