Setting Up For Trap Dial-Out (Models 9820, 9820-2M, 9820-8M); Setting Up An External Modem For Trap Dial-Out; Setting Up Call Directories For Trap Dial-Out - Paradyne 9820 User Manual

Setting Up for Trap Dial-Out
(Models 9820, 9820-2M, 9820-8M)

Setting Up an External Modem for Trap Dial-Out

Setting Up Call Directories for Trap Dial-Out

9820-A2-GB20-20
An external modem can be attached to the COM port for dialing out when an
SNMP trap is generated.
To set up an external modem, you need to:
1. Set up SNMP trap managers.
2. Set up an external modem.
3. Set up Modem Directory phone numbers.
4. Configure trap dial-out.
See Configuring SNMP NMS Security
Setting Up Call Directories for Trap Dial-Out
See
See Configuring SNMP Traps and Trap Dial-Out
(Models 9820, 9820-2M, 9820-8M.) When trap dial-out is desired, the PC or
asynchronous terminal must be disconnected from the unit's COM port when
setup is complete, and an external modem connected instead. See
the COM Port to Support an External Modem
(Models 9820, 9820-2M, 9820-8M.) To set up call directories:
Procedure
1. Set up directory phone numbers.
Main Menu Control
2. Select Directory Number A (for Alarm).
3. Enter the phone number(s).
Valid characters include . . . For . . .
ASCII text
Space,
underscore ( _ ), and
dash (–)
Comma ( , )
B
P
T
W
4. Save the phone number(s).
June 2000
to set up SNMP trap managers.
when trap dial-out is desired.
for trap and alarm information.
for additional information.
Modem Call Directories
Entering the phone number.
Readability characters.
Readability character for a 2-second pause.
Blind dialing.
Pulse dialing, unless B is specified.
Tone dialing, unless B is specified.
Wait for dial tone.
Configuration Options
Configuring
4-5