Problem Indicators - Paradyne 9820 User Manual

Troubleshooting

Problem Indicators

8-2
Physical Tests
— DTE Loopback
IP Ping Test
Lamp Test
The unit provides a number of indicators to alert you to possible problems:
Indicators . . .
LEDs
Health and Status
Performance statistics
Alarm conditions that will
generate an SNMP trap
SNMP traps
June 2000
See . . .
Displaying LEDs and Control Leads
LEDs in Chapter 6, Monitoring , as well as the user
interface screen.
Main Menu Status
Display LEDs and Control LEDs
Health and Status Messages
Main Menu Status System and Test Status
Messages also appear at the bottom of any menu-driven
user interface screen.
Performance Statistics in Chapter 6, Monitoring , to help
you determine how long a problem has existed.
Alarms on page 8-7.
Appendix B, SNMP MIBs and Traps, and RMON Alarm
Defaults .
Traps supported include warm-start, authentication-failure,
enterprise-specific (those specific to the unit), link-up, and
link-down.
and Front Panel
in Chapter 6, Monitoring .
9820-A2-GB20-20