Trap: Warmstart; Trap: Authenticationfailure - Paradyne 9820 User Manual

Trap: warmStart

Trap: authenticationFailure

9820-A2-GB20-20
This trap indicates that the FrameSaver unit has been reset and has stabilized.
Table B-3. warmStart Trap
Trap What It Indicates
warmStart FrameSaver unit has just
reinitialized and stabilized
itself.
Variable-Binding
devLastTrapString
(devHealthAndStatus. mib)
This trap indicates that access to the FrameSaver unit was unsuccessful due to
lack of authentication.
Table B-4. authenticationFailure Trap
Trap What It Indicates
authenticationFailure Access to the FrameSaver
unit was attempted and
failed.
Variable-Binding
devLastTrapString
(devHealthAndStatus. mib)
June 2000
SNMP MIBs and Traps, and RMON Alarm Defaults
Possible Cause
Reset command sent.
Power disruption.
String: String:
'Unit reset.'
Possible Cause
SNMP protocol message not
properly authenticated.
Three unsuccessful attempts
were made to enter a correct
login user ID/password
combination.
IP Address security is enabled
and a message was received
from the SNMP Manager
whose address was not on the
lost of approved managers.
String:
'Unauthorized access attempted.'
B-7