Logging On - Paradyne 9820 User Manual

User Interface and Basic Operation

Logging On

2-2
Start a session using one of the following methods:
Telnet session via:
— An in-band management channel through the frame relay network.
— A local in-band management channel configured on the DTE port
between the FrameSaver unit and the router.
Dial-in connection using the internal modem (Model 9820-45M).
Direct terminal connection over the COM port (Terminal port on the
Model 9820-45M).
When logging on, the User Interface Idle screen appears.
If no security was set up or security was disabled, the Main Menu screen
Main Menu
(see on page 2-4) appears. You can begin your session.
If security was set up and is enabled, you are prompted for a login. Enter
your login ID and password.
When the user interface has been idle, a session is automatically ended and the
screen goes blank when the unit times out. Press Enter to reactivate the
interface.
Procedure
To log in when security is being enforced:
1. Type your assigned Login ID and press Enter.
2. Type your Password and press Enter.
— Valid characters – All printable ASCII characters
— Number of characters – Up to 10 characters can be entered in the
Login ID and Password fields
— Case-sensitive – Yes
An asterisk ( *) appears in the password field for each character entered.
June 2000 9820-A2-GB20-20